With the fear of frost looming at the end of October, we had to come up with a suitable winter home for our plant collection which was taking up residence outside and our deck.
They’re now sitting pretty in our living room amongst my favorite pair of vintage chairs.
We came up with a game plan to extend our sunny bay windowsill in order to accommodate the plants and my favorite vintage pots, bowls and vases. We started with fantastic weathered old 1×6 lumber that has almost a barnwood-like quality. We needed 6 – 5 foot boards in total. The boards previously made up a section of simple post and beam fencing in our yard. Each was stripped down to expose the worn grain. Two boards were paired together to make a 12 inch deep shelf. Three sets of boards were attached vertically to one another to create a 3-tier shelf system.
Plumbing pipe shelving is not a new concept but we came up with our own simple plant stand version using pipes and fittings to connect the unit. There are 2 connecting points on each shelf therefore we used a total of 4 – 9 inch plumbing nipples and 8 flanges which screw into the wood. These also double nicely as book ends. The plumbing materials were the most expensive part of this DIY project.
We decided on a set of simple 7 inch turned legs for the bottom which cost less than $5 each at Lowe’s. The raw wood of the legs and shelves received an application of hemp oil for a durable water repellent topcoat which also left a subtle stain highlighting the wood grain.
The plants have happily been relocated to the new plant stand where they are enjoying the expansive window and, normally, bright light.
These snaps are from this morning during a dreary, cold November rain. I love the mix of terra cotta amongst the saturated colors in the kilim rug and mohair chairs – all vintage finds of course. Such a cozy new space!